Rigid outer box - UN3373 Cat B

Rigid outer box - UN3373 Cat B


Pack of 500


Rigid outter boxes which are both flexible and resiliant, designed for carriage of hazardous material and samples. 


This box is designed in compliance of UN3373 P650 packaging instructions.


The Rigid boxes can be used alongside our 95 kpa bags to form the needed requirement to ship UN3373 category b.


The standard for UN3373 is as follows:


The P650 packaging instructions for liquid substances state:-
a. The primary receptacle(s) shall be leak proof;
b. The secondary packaging shall be leak proof;
c. The primary receptacle or the secondary packaging shall be capable of withstanding, without leakage, an internal pressure of 95 kPa (0.95 bar);
d. If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them;
e. Absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging;
f. Either the secondary or outer packaging must be rigid.
The packaging must be of good quality and strong enough to withstand the shocks and loadings normally encountered during transport. It must prevent any loss of contents that could occur due to vibration or changes in temperature, humidity or pressure.





    01623 237 171

    ©2020 by kPa Bags Limited.